DigiDesign Mbox Pro Einstellungsanleitung PDF herunterladen (Seite 58)

Mbox 2 Pro Setup Guide50

Interface Controls

Create Adds a new instrument to the Instru-

ment Name list.

Delete Deletes the instrument or instruments

selected in the Instrument Name list.

Import Imports an existing MIDI Studio Setup

file.

Export Exports the current MIDI Studio Setup

file.

Show Duplicate Emulated Ports When this op-

tion is selected and you are using a MIDI inter-

face that supports timestamping (such as MIDI

I/O), in addition to the MIDI ports on

Mbox 2 Pro, the MIDI Studio setup window

shows both the DirectMusic time-stamped out-

put ports, and non-stamped duplicate emulated

output ports.

Instrument List

The Instrument list contains all the currently

defined instruments. Selecting an instrument in

the list displays that instrument’s properties in

the Properties section of the window.

Properties Section

The Properties section lets you edit information

for new instruments, or instrument currently se-

lected in the Instrument list.

When a previously defined instrument is se-

lected in the Instrument list, the Properties sec-

tion changes to reflect the properties of the se-

lected instrument.

To deﬁne an instrument with MIDI Studio Setup:

1 Choose Setup > MIDI > MIDI Studio.

2 Click Create.

3 In the Instrument Name ﬁeld, type the name

of your instrument, and press Enter.

4 Set a manufacturer and model for the new de-

vice from the corresponding pop-up menus. If

the Manufacturer and Model pop-up menus do

not provide a name for your particular device,

select None.

5 From the Input pop-up menu, select the input

port on your MIDI interface that is connected to

the MIDI Out of your instrument.

Some MIDI Interfaces will not properly load

or unload their drivers unless you quit and

re-launch Pro Tools. Check the documenta-

tion that came with your MIDI interface for

more information.

MIDI Studio Setup Properties section

If you do not enter an instrument name, the

Instrument Name field will automatically

inherit information from the Manufacturer

and Model pop-up menu.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 75 76

Kommentare zu diesen Handbüchern

Keine Kommentare