DigiDesign Control 24 Spezifikationen PDF herunterladen (Seite 27)

Chapter 3: Audio Connections 17

Additional I/O Connectors

Control|24 provides the following individual

connectors on the back panel:

Input

MIC and LINE Inputs These 16 balanced connec-

tors (XLR for Mic inputs, TRS for 1/4-inch in-

puts) are the inputs to the Control|24 mic

preamps. Levels are adjustable with a dedicated

Gain control on the Control|24 channel strips.

(MIC and LINE inputs are output through the

Control|24 LINE OUTS 1–8, and LINE OUTS

9–16.)

D.I. INPUTS These two balanced, 1/4-inch input

jacks accept instrument-level inputs and are op-

timized for direct input of guitars, basses, and

other low-level devices that would otherwise re-

quire a direct box. These inputs can only be used

as Instrument inputs for Control|24 mic preamp

channels 1 and 2.

AUXILIARY INPUTS These two balanced, line-

level TRS inputs are for cue (headphone) mix

signals, and should be connected to your

Pro Tools cue outputs (usually, a pair of audio

interface outputs carrying a Send-based cue mix,

for monitoring during overdubbing and track-

ing). These inputs can be controlled and routed

in the Communications and Headphones sec-

tion.

EXTERNAL TALKBACK IN This XLR connector

lets you connect an external microphone to use

in place of the built-in Talkback mic.

EXTERNAL LISTENBACK IN This XLR connector

lets you connect an external Listenback micro-

phone, to provide a way for two-way communi-

cation between the tracking room and the con-

trol room.

Output

AUXILIARY OUTPUTS These two balanced, line-

level TRS outputs are for cue mixes, and should

be connected to the inputs of your cue system.

SUBMIXER OUTPUTS These two line-level, bal-

anced TRS outputs carry the submix from the

LINE SUBMIXER. The LINE SUBMIXER output is

only accessible through the SUBMIXER OUT-

PUTS (in other words, the Line Submixer is not

mixed or routed to any other Control|24 inter-

nal busses or hardware outputs).

SLATE OUTPUT This balanced TRS connector

outputs the Control|24 Slate output, which can

include Talkback and Listenback signals. Con-

nect this output to an available Pro Tools input

for recording slates (take number, version num-

ber, and studio communication).

Other Connectors and Switches

Footswitch Inputs Provide footswitch control for

Pro Tools transport functions (such as

play/stop, and punch in/out), and Talkback.

Function and polarity are individually selectable

for each input.

Ethernet Provides an Ethernet connection be-

tween Control|24 and your computer.

Power Accepts a standard AC power cable, and is

auto-switching for use in any country.

Switches

Power Turns Control|24 on or off.

Phantom Power Two switches that enable +48v

phantom power to their corresponding bank of

eight mic preamp channels (Switch 1 affects

preamp channels 1–8, and Switch 2 affects

preamp channels 9–16.)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 158 159

Kommentare zu diesen Handbüchern

Keine Kommentare