DigiDesign Mbox Pro Spezifikationen PDF herunterladen (Seite 49)

Chapter 7: Making Studio Connections 41

Connecting Electric Guitar or Bass

To use a guitar with Mbox 2 Pro:

1 On the front of the Mbox 2 Pro, plug your gui-

tar cable into one of the DI inputs.

2 On the front of the Mbox 2 Pro, set the source

to DI by pressing the Mic/DI switch until the DI

LED is lit.

3 On the front of the Mbox 2 Pro, turn the

Monitor control to the desired level.

4 On the front of the Mbox 2 Pro, carefully turn

the Gain control to the right to increase the in-

put level of your guitar.

Connecting Keyboards and Mixers

To use a keyboard or mixer with Mbox 2 Pro:

1 Plug your keyboard, mixer, or other audio

source into either the Input 1 or Input 2 Line

(TRS) inputs on your Mbox 2 Pro. If your source

is stereo (such as a stereo keyboard or the stereo

output from a mixer), connect the left channel

(often the white plug) to Input 1, and right

channel (often the red plug) to Input 2.

2 On the front of the Mbox 2 Pro, set the Source

to Mic by pressing the Mic/DI switch until the

Mic LED is lit.

3 On the front of the Mbox 2 Pro, turn the

Monitor control to the desired level.

4 Set your instrument’s volume to its optimal

level. For example, the optimal level for most

keyboards is between 80% and 100% of maxi-

mum volume.

5 On the front of the Mbox 2 Pro, carefully turn

the Gain control to the right to increase the in-

put level of your keyboard.

To use Aux In (3–4) Line inputs:

1 Plug your keyboard, mixer or other line level

device into the Aux In Line inputs (L and R).

2 On the front panel of Mbox 2 Pro, press the

Aux In Source select switch as needed so the

Phono LED is off (unlit). The switch should be

in its “out” position.

Connecting DJ Equipment

To use the Phono inputs:

1 Plug your turntable, mixer, or similar outputs

into the Aux In Phono inputs (L and R).

2 If appropriate, connect your turntable to the

Mbox 2 Pro grounding post. This is necessary

with some preamps and other DJ equipment to

help keep the signals free of (unwanted) hum

and buzz.

3 On the front panel of Mbox 2 Pro, press the

Aux In Source select switch as needed so the

Phono LED is on (lit). The switch should be in

its “in” position.

Connecting guitar to the Input 1 DI connector

If your keyboard has unbalanced outputs,

use the Mbox 2’s DI inputs. Refer to your

keyboard’s documentation

Input 1 DI

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 83 84

Kommentare zu diesen Handbüchern

Keine Kommentare