DigiDesign Control 24 Spezifikationen PDF herunterladen (Seite 114)

Control|24 Guide104

When you have confirmed a send assignment,

the SWITCH ACTIVE LEDs will light up below

the encoder switches that correspond to that

send’s destination and the panning information

should show up in the scribble strips.

Send Level and Mute Controls

The encoder knob below the send destination

strip functions as the send level control. The re-

spective scribble strip briefly displays the send

level information and then reverts back to the

send destination information.

The corresponding encoder switch below this

knob functions as a Send Mute toggle control.

The respective scribble strip briefly displays

“Mute” when muted and then reverts back to

the send destination information.

When muted, this encoder switch LED will

light. See “Muting Sends” on page 105 for more

information about muting Sends.

Send Panning and Pre/Post Control

The next scribble strip, to the right of the send

destination indicator, displays panning infor-

mation for the send. The encoder knob below

the scribble strip adjusts panning.

The associated encoder switch serves as a pre- or

post-fader toggle for the send (lit if pre-fader).

To assign a Send from Pan/Send mode:

1 Press the PAN/SEND switch on a channel to

display its Sends in the Channel Bar.

2 To page the Channel Bar display between

Sends A–E and Sends F–J, press the left and right

Channel Bar Scroll switches.

3 Press the ASSIGN switch in the ASSIGNMENT

section.

4 For each send where you want to make an as-

signment, turn the channel data encoder to

scroll through the available path choices.

5 Press the ﬂashing switch below an encoder to

conﬁrm the corresponding Send assignment.

6 Press the ASSIGN switch to conﬁrm all assign-

ments.

Shortcuts

To make the same output assignment to selected

channels only:

1 Press the PAN/SEND switch on a channel.

2 Press the ASSIGN switch in the ASSIGNMENT

section.

3 Turn the channel data encoder to scroll

through the available path choices.

4 While holding APPLY TO ALL SELECTED

CHANNELS or OPT(ALT)/ALL+SHIFT/ADD, con-

ﬁrm the assignment by pressing the ﬂashing

switch directly below the channel encoder, or

pressing the ASSIGN switch.

When scrolling through input, output, or in-

sert options, the currently selected assign-

ments will be indicated by a “>“symbol in

front of the assignment name.

You can exit Assign mode at any time, leav-

ing all

unassigned sends unchanged, by

pressing the flashing master ASSIGN switch

or the flashing ESC/CANCEL switch.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 158 159

Kommentare zu diesen Handbüchern

Keine Kommentare

DigiDesign Control 24 Spezifikationen Seite 114

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte DigiDesign Control 24