DigiDesign Control 24 Spezifikationen PDF herunterladen (Seite 78)

Control|24 Guide68

EQ BYP Mode and DYN BYP Mode

When in Bypass mode (EDIT/BYP switch LED

on), the channel EQ and DYN switches serve as

bypass switches for all EQ or Dynamics plug-ins

assigned to a channel.

A lit channel EQ or DYN switch in this mode in-

dicates that at least one of these plug-ins is al-

ready bypassed.

The LED will flash if there is more than one

plug-in of the same type on the channel (more

than one EQ, or more than one DYN), and they

are in a mixed state when some but not all of

them are bypassed. In this case, pressing the EQ

or DYN switch will enable any bypassed plug-ins

of that type, and the LED will no longer light.

INSERTS Switch

The INSERTS switch accesses all of your TDM

and RTAS plug-ins. Depending on the state of

the global INS/BYP switch (located on the left at

the same level as each channel’s three dedicated

switches), the INSERTS switch serves two differ-

ent general functions.

Master INS/BYP Switch

In INSERTS mode (INS/BYP LED is off), the IN-

SERTS switch on each channel serves to select

that channel for insert assignment or editing.

In BYPASS mode (INS/BYP switch LED is on), the

INSERTS switch serves to bypass the plug-ins or

sends on all inserts on each channel.

In this mode, the INSERTS switches are latching,

meaning that multiple channels can be by-

passed additively.

For more detailed information on insert effects

editing and routing, see Chapter 13, “Plug-Ins

and Inserts.”

REC ARM and MASTER REC

Switches

These switches arm disk tracks for recording.

Rec Arm Function

The REC ARM switch toggles each channel in

and out of record-ready mode. If Pro Tools is not

playing or recording, a channel’s REC ARM

switch LED will flash when the channel is armed

in record-ready mode. The switch lights solid

when Pro Tools enters record mode.

Any tracks not placed in Record Safe mode (see

“Solo and Record Safe Modes” on page 63) will

be placed in Record-Ready mode when their

REC ARM switches are engaged.

Master Rec “QuickMode” Function

The MASTER REC switch, located to the left of

the REC ARM switch row, is a master status indi-

cator for REC ARM, and toggles all record arm-

ing status on all channels.

There are special key commands that apply to

differentiating the record-enabling of MIDI and

audio tracks:

• The OPT(ALT)/ALL switch applies an audio

record-enable command to MIDI tracks.

• SHIFT/ADD modiﬁes a record-enable com-

mand to apply to selected channels.

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 158 159

Kommentare zu diesen Handbüchern

Keine Kommentare